Difference: BoardSupportPackageWB (31 vs. 32)

Revision 322022-07-16 - PeterSchmid

Line: 1 to 1
 
META TOPICPARENT name="WebHome"
%DASHBOARD{ section="banner"
Line: 330 to 330
 
Added:
>
>

Pinouts

STM32WB Nucleo Board

stm32wb-nucleo.jpg

Arduino Pinout

nucleo wb55rg arduino left.png
Arduino left
nucleo wb55rg arduino right.png
Arduino right

Morpho Pinout

nucleo wb55rg morpho left.png
Morpho left
nucleo wb55rg morpho right2.png
Morpho right

Push Buttons

Signal name STM32WB55 pin Comment
SWITCH1 PC12 WKUP3
SWITCH2 PC13 WKUP2
SWITCH3 PC13 WKUP2

LEDs

Signal name STM32WB55 pin Comment
D11 PA7 SPI1_MOSI
RGB_SELECT PH1 RGB CS

UART VCP ST-LINK

Signal name STM32WB55 pin Comment
UART_TX PB6 USART1_TX
UART_RX PB7 USART1_RX

Quad SPI for Flash

Signal name STM32WB55 pin Comment
FLASH_NCS PD3 QUADSPI_BK1_NCS
FLASH_IO0 PB9 QUADSPI_BK1_IO0
FLASH_IO1 PD5 QUADSPI_BK1_IO1
FLASH_IO2 PD6 QUADSPI_BK1_IO2
FLASH_IO3 PD7 QUADSPI_BK1_IO3
FLASH_SCLK PA3 QUADSPI_BK1_SCLK

STM32WB Nucleo Dongle

Push Button

Signal name STM32WB55 pin Comment
SWITCH1 PC12 WKUP3

LEDs

Signal name STM32WB55 pin Comment
D11 PA7 SPI1_MOSI
RGB_SELECT PH1 RGB CS

Nucleo Dongle - Feather Adaptor

Remove the USB Type A plug from the dongle and add a Adafruit Micro B breakout board. It is convenient to have a Micro-SD breakout board (level shifter is not needed) and JTAG connector (I prefer the 14 pin STM variant to have a serial interface by the ST-LINK). Everything mounted on headers on the backside of FeatherWing Tripler Mini Kit.

Description Dongle Function Feather Micro-SD JTAG 14pin
GND CN1.1 GND JP1.13 GND GND 5, 7, 11
NRST CN1.2 RES JP1.16 RST   12
PA13 CN1.3 SWDIO -   4
PA14 CN1.4 SWDCLK -   6
PB3 CN1.5 SWO A4?   8
3V3 CN1.6 3V3 JP1.14/15 3V3 3V 5V 3
PB2 CN1.7 SPI_CS - CS  
PA5 CN1.8 D13 SCK JP1.6 SCK CLK  
PA6 CN1.9 D12 MISO JP1.4 MISO DO  
PA7 CN1.10 D11 MOSI JP1.5 MOSI DI  
PB8 CN2.1 D15 SCL JP3.11 SCL    
PB9 CN2.2 D14 SDA JP3.12 SDA    
PA0 CN2.3 A3 JP1.9 A3    
PA2 CN2.4 D1 JP1.2 D1    
PA3 CN2.5 D0 JP1.3 D0    
PB6 CN2.6 UARTRX     13
PA9 CN2.7 D9 JP3.8 D9    
PB7 CN2.7 UARTTX     14
PA8 CN2.8 D6 JP3.9 D6    
GND CN2.9 GND GND    
PA1 CN2.10 A2 JP1.10 A2    
USB5V   5V JP3.3 USB    
BOOT0   BOOT0 JP1.1 B0    
PB0 AT2 ?     JP1.12 A0    
PB1 AT2 ?     JP1.11 A1    
PB3 ? CN1.5 SWO JP1.8 A4?   8
      JP1.7 A5    
      JP3.1 VBAT    
      JP3.2 EN    

 
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback