Hub Dynamo Charger

Li-Ion Battery Pack HY-LINE H2B179.1

https://www.distrelec.ch/Web/Downloads/_t/ds/HY%20Line-H2B179.1_eng_tds.pdf

  • 1S2P-Configuration
  • Vnom 3.6 V, 6666 mAh
  • Integrated protection circuit
  • Premium quality Sanyo cell NCR18650B
  • Shrink foil
  • No memory effect
  • 100 g, 66 x 40 x 19 mm

Safety protection board

Cut off voltage 4.28 +/- 0.025 V
Over charge release 4.08 +/- 0.025 V
End of discharge voltage 2.8 +/- 0.050 V
Over discharge release 2.8 +/- 0.050 V
Over current detection 4.05 +/- 0.085 A
Over discharge delay time 144 +/- 29 ms

-- Peter Schmid - 2022-01-21

Comments

This topic: Velo > WebHome > HubDynamoCharger
Topic revision: r1 - 2022-01-21 - PeterSchmid
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback